3d modeling of the electronics enclosure: preparatory work
The body of the electrical appliance – the surface to which all the parts that ensure the correct operation of the device are attached. Also on the body is placed various holes for buttons and for fasteners.

When designing 3d models of the housing for electronics it is worth paying attention to:

• design of the product;
• correspondence of the form to the content;
• materials for the case.

To make 3d modeling you need to use one of the ways of depicting the object:

• drawing;
• photograph;
• real object;
• 3D scanning.

To create a model by drawing you will need:

• drawings of all sides of the object;
• dimensions of the object, wall thickness;
• material recommendations.

3D models of the body on the photo are rarely used. But, if it is not possible to provide drawings (they are lost), you will need:

• photos of all sides of the object;
• dimensions;
• instructions about the material of the product.

The easiest way to create a 3d model of an enclosure for an electrical appliance is with a 3D scanner. Scanning allows you to get a three-dimensional image of any size: from a miniature box to a panel cabinet.

The source material for the model can be one of the above or all together: the more information – the better and faster the product will be created.

If in the future it is planned to print the product, then before you start modeling you need to decide on the material for printing. KLONA 3D modeling agency will help you in this. You can order a 3D model of any complexity with subsequent 3D printing.

The post 3D modeling of electronics enclosure appeared first on IEcast-Сook.

Advantages of jewelry 3d-modeling

3d-modeling of jewelry is the process of creating a visualized model of jewelry based on a drawn sketch, drawing or photo. Well-known companies engaged in the production of jewelry have long been using this technology, because it has a number of advantages

Creation of the most accurate copy of the future product within a short time;
making corrections and adjustments to the three-dimensional model an unlimited number of times;
designing a collection on the basis of one model of a piece without significant time expenditures;
Determination of the exact weight of a jewelry piece at the 3d modeling stage;
the ability to create a model of a product that meets the basic requirements and parameters of jewelry technology.

Jewelry printing

It is not always the case that the finished work corresponds to the original idea of the author. A few years ago, in order to achieve the ideal shape of the product, to realize the ideas of the author, it was necessary to create a large number of prototypes. Today, this problem no longer exists thanks to the introduction of digital technologies. A drawn sketch or photo is sent to a 3D-modeller, who with the help of special computer programs creates a three-dimensional model of the jewelry.

The specialist directly in the 3D-editor superimposes a transparent sketch on the volumetric image. This allows you to repeat all the lines and patterns to the nearest hundredth of a millimeter. The work of 3D-modeller is that he controls only the technical aspects, the artist evaluates the work in terms of aesthetic appeal, adding, removing or modifying the details of the model. Thanks to 3d-modeling of jewelry, everyone can create their own unique piece of jewelry. All you need to do is to describe or depict your ideas to a 3D specialist.

The post Jewelry 3D modeling appeared first on IEcast-Сook.

3D modeling is the process of building a three-dimensional model of a three-dimensional object.

Building a 3d model of the object allows you to:

• Present the object to the customer;
• Evaluate the aesthetic characteristics and functional properties of the object;
• Visualize a nonexistent object;
• Design new objects, etc.

3D modeling technologies are used today in almost all branches of human activity: architecture, medicine, education, industry, advertising and marketing, cinematography and so on.

3D graphics is the result of work on 3d modeling. Three-dimensional graphics is considered a special type of computer graphics, which uses tools and techniques of work to obtain images of 3d-objects, as well as the management of these objects in three-dimensional space. The result of 3D graphics can be presented as a “flat” image – projection or as 3d animation. 3D graphics is widely used in cinematography and computer games.

With the help of three-dimensional graphics and 3d modeling technologies, it is possible to create a realistic and most accurate copy of a real object, reduced, life-size or enlarged. And also models of nonexistent or invisible to the human eye objects (model of atom or solar system).

Directions of 3d-graphics:

SGI graphics – development of still or moving images that are used in cinematography, television, fine art, etc.
Computer animation – creating moving images used in computer games.

The post 3D modeling for games appeared first on IEcast-Сook.